JCO锥型橡胶护舷
JCO Cone type rubber fender
一、特点：feature
1、锥型橡胶护舷是鼓型橡胶护舷的等三代产品，结构更加合理，变形量可达到70％，同等规格护舷吸能量提高近一倍，使用寿命长，可降低码头工程造价。
Cone type rubber fender is the 3rd generation of cell type rubber fender,the structure more reasonable,deflection can reach 70%,the equal specification fender energy absorb raise one more times,long life using.it can reduce the cost of the dock project.
2、在船舶倾斜靠泊时（10°以下），性能基本不变。
While vessel angular berthing,the performance basicly unchanged.
1、护舷前沿设有防冲板，可大大降低船舶傍板的面压力，面压力可控制在200KN/㎡以下，特别适用于大型船舶靠泊
Front panel set in the margin of fender,it can lower the surface pressure of the vessel side board,the surface pressure can be controlled at below 200KN/㎡.
It apply for large vessel berthing.
4、防冲板前面安装超高分子量聚乙烯，可减小船舶与护舷的摩擦系数，大大降低船舶靠泊时剪切力，从而提高护舷使用寿命。
UHMW-PE installed in front of front panel,it can reduce the friction factor between vessel and fender,and lower the shear strength while vessel berthing,and raising the fender using life.
5、特别适用于要求反力低，吸能量高的码头及使用超级鼓型橡胶护舷的所有码头，安装形式多样，安装简单快捷。
It apply for low reaction force,high energy absorbtion doct and that using supper cell rubber fender all dock.the style of installation variety. Easily be installed.
